200GBASE QSFP56 Active Electrical Cable (QSFP56 to QSFP56 )

AEC-200G-QSFP
Rp 900.000 Stok Tersedia (44 unit)

Silakan masuk terlebih dahulu untuk menambahkan produk ke keranjang belanja Anda.

▸ 200G to 200G data rate.
▸ Built-in diagnostic features.
▸ Typ.4.5W power dissipation on each end.
▸ Recognizable, purple PVC jacket.
▸ Hot pluggable and I2C management interface.
▸ RoHS2 compliant and SFF-8636 compliant.
▸ Operating case temperature range: 0 to +70ºC.

MSA Compatible AEC Cable 200G (4x56G) QSFP56 PAM4 to 200G (4x56G) QSFP56 PAM4

The 200G (4x56G) QSFP56 PAM4 to 200G (4x56G) QSFP56 PAM4 active electrical cable is designed for rack-to-rack connectivity and supports reaching up to 7m data transmission. The AEC cable complies with SFF-8636 and SNIA SFF-8679 QSFP28 electrical specifications. It adopts the standard QSFP-DD type 2 form factor and complies with MSA specifications. The hot pluggable cable supports bidirectional 200Gbps data transmission per cable. The cable provides a 4 x 56G PAM4 signal in each direction. The typical power dissipation on each end is 4.5 Watts, a single 3.3V power supply, an operating case temperature range of 0 to +70ºC, and built-in diagnostic features. The active electrical cable realizes high-performance interconnects through the I2C management interface.
The AEC cable is ideal for telecom and data center applications. It consumes up to 25% less power than the AOC cable and 75% less volume than the DAC cable. The AECs offer 10 years of service life.

Specification

Module Form Factor QSFP56
Max. Data Rate 200Gbps
Cable Type 8P 30AWG
Jacket Material PVC (Purple)
Digital Diagnostics (DDM/DOM) Supported
BER (Pre-FEC) 1.0x10-8
Management Interface I2C
Temperature Range 0°C to 70°C
Supported Management Interface SNIA SFF-8636
Electrical Interface and Pin-out 38-pin edge connector
Vendor Name Credo
Data Rate 200 Gb/s (4x56G PAM4)
Number of Data Lanes 4 TX and 4 RX per module (PAM4)
AWG 2.5m(32AWG), 3m(32AWG), 5m(30AWG)
Typical Diameter 6.5mm
Cable Distance Up to 5 m (16.4 ft)
BER (Post-FEC) 1.0x10-15
Minimum Bend Radius 60mm
Power Consumption 4.5 W per side
Protocols 400GBASE Ethernet
Power Supply 3.3V
Supported Electrical Standards SNIA SFF-8636 QSFP28

Certifications

FCC Certified CE Certified RoHS Compliant

Frequently Asked Questions (FAQ)

Ya, seluruh modul transceiver kami telah dilengkapi dengan firmware EEPROM yang kompatibel luas dengan brand switch terkemuka (Cisco, MikroTik, Ubiquiti UniFi/EdgeSwitch, Asterfusion, Huawei, Arista, Juniper, dan standar MSA generic). Anda dapat memilih profil kompatibilitas pada dropdown sebelum melakukan pemesanan.
Ya, transceiver ini mendukung DDM/DOM secara real-time. Anda dapat memantau parameter kritis seperti suhu operasional modul, daya transmisi (TX Power), daya penerimaan (RX Power), voltase, dan arus laser langsung melalui CLI maupun web GUI perangkat jaringan Anda.
Setiap unit transceiver melalui prosedur pengujian fisik dan fungsional 100% pada switch rack lab kami. Kami memverifikasi kontinuitas data, zero-packet loss pada traffic penuh, kestabilan temperatur, dan kompatibilitas port sebelum dikemas aman menggunakan ESD shield packaging.
Kami memberikan jaminan garansi resmi selama 3 tahun untuk seluruh produk transceiver optik. Jika terdapat malfungsi teknis non-human error, kami menyediakan layanan penggantian unit langsung (1-to-1 replacement) secara cepat demi kelancaran operasional infrastruktur Anda.
Untuk item bertanda 'Stok Tersedia', pesanan diproses dan dikirim pada hari kerja yang sama. Untuk kebutuhan pengadaan proyek dalam kuantitas besar (volume project), Anda dapat meminta penawaran resmi (request quote) untuk mendapatkan harga khusus enterprise dan estimasi jadwal pengiriman terjadwal.